An example of mutesaki tokyō (six brackets, enlarge to see numbers)

The tokyō (斗栱・斗拱^?, more often 斗きょう)^{[note 1]} (also called kumimono (組物^?) or masugumi (斗組^?)) is a system of supporting blocks (斗 or 大斗, masu or daito^?, lit. block or big block) and brackets (肘木, hijiki^?, lit. elbow wood) supporting the eaves of a Japanese building, usually part of a Buddhist temple or Shinto shrine.^[1] The use of tokyō is made necessary by the extent to which the eaves protrude, a functionally essential element of Japanese Buddhist architecture. The system has however always had also an important decorative function. Like most architectural elements in Japan, the system is Chinese in origin (on the subject, see the article Dougong) but has evolved since its arrival into several original forms.

In its simplest configuration, the bracket system has a single projecting bracket and a single block, and is called hitotesaki. If the first bracket and block group support a second similar one, the whole system is called futatesaki, if three brackets are present it is called mitesaki, and so on until a maximum of six brackets as in the photo to the right.

Each supporting block in most cases supports, besides the next bracket, a U-shaped supporting bracket set at 180° to the first (see photos in the gallery below).

The Protection of Cultural Properties logo (see gallery below) represents a tokyō, considered an element of Japanese architecture which stands for the continuity in time of cultural property protection.

Function and structure [edit]

The roof is the most visually impressive part of a Buddhist temple, often constituting half the size of the whole edifice. The slightly curved eaves extend far beyond the walls, covering verandas.^[2] Besides being determinant to the general look of the edifice, the oversize eaves give its interior a characteristic dimness, a factor which contributes to the temple's atmosphere. Finally, the eaves have a practical function in a country where rain is a common event, because they protect the building carrying the rain as far as possible from its walls. The roof's weight must however be supported by complex bracket systems called tokyō.^[2] The further the eaves extend, the greater and more complex must the tokyō be. An added benefit of the tokyō system is its inherent elasticity, which lessens the impact of an earthquake acting as a shock absorber.^{[3] [4] [5]}

This bracketing system, being essential both structurally and esthetically, since it was imported from China has been altered and refined many times. It is made of a combination of weight bearing blocks (masu) and bracket arms (hijiki). The bearing block, when set directly on a post, is called daito, or "large block". When it connects two brackets, it is instead called makito (巻斗^?). Bearing blocks installed on top of corner posts are of necessity more complex and are called onito (鬼斗, demon blocks^?) because of how difficult they are to make.^[2] In its simplest configuration, each tokyō includes a single outwardly-projecting bracket with a single supporting block, in which case the complex is called hitotesaki (一手先, lit. one fingertip^?). The projecting bracket is just the tip of one of the roof's beams.^[6] If the first bracket and block group supports a second similar one, the whole complex is called (futatesaki (二手先, lit. two fingertips^?)). The tokyō may also have three (mitesaki (三手先, lit. three fingertips^?)) or more such steps, up to six (mutesaki (六手先, lit. six fingertips^?). The number of steps used to indicate the rank of a butsudō, the higher ranks having more, but the custom was abandoned after the Heian period.^[7] In most cases, besides the projecting bracket above it, a bearing block supports another bracket set at 180° (see schematic photo below), extending laterally the support provided by the system.

Wayō-, Zenshūyō- and Daibutsuyō-style tokyō all differ in details, the first being the simplest of the three. The Daibutsuyō style has for example a dish-shaped decoration called sarato (皿斗, lit. dish block^?) under each block, while the Zen'yō rounds up in an arc the bracket's lower ends.^[8] Another Zenshūyō feature is the kobushibana (拳鼻, lit. fist nose^?) or kibana (木鼻, lit. wooden nose^?), a nose-like decoration carved after the last protruding bracket. (See photo in the gallery.) Some of these features can also be found in temples of non-Zen sects.

Notable types [edit]

Sumisonae [edit]

The sumisonae (隅備 or 隅具^?) or sumitokyō (隅斗きょう^?) are the brackets at the corner of a roof, having a particularly complex structure. The regular brackets between two sumisonae are called hirazonae (平備^?) or hiratokyou (平斗きょう^?).

Futatesaki [edit]

Very common two-step bracketing system used in a variety of structures. See in the gallery for example the photo of a belltower (shōrō).

Mitesaki [edit]

The three-step complex (mitesaki) is the most common in Wayō-style structures.^[9] Its third step is usually supported by a so-called tail rafter (尾垂木, odaruki^?), a cantilever set between the second and the third step (see illustration above and photo in the gallery).^[2]

Yotesaki [edit]

The four-step complex (四手先斗きょう, yotesaki tokyō^?) is used mainly in the top section of a tahōtō.^[10]

Mutesaki [edit]

The mutesaki tokyō (see photo above) is a six-step bracketing system whose most famous example can be seen at Tōdai-ji's Nandaimon.^[11] In that gate's case, it consists of just six projecting brackets with no brackets at right angles (see photo above).

Kumo tokyō [edit]

The kumo tokyō (雲斗栱, lit. cloud tokyō^?) is a bracket system where the projecting bracket is shaped in a way thought to resemble a cloud. It is rare in extant temples, and its most important examples are found in Hōryū-ji's Kondō, five-storied pagoda and Chūmon.^[12] These bracket systems are believed to be a Japanese invention of the Asuka period, as there is no evidence they came from the Continent.

Sashihijiki [edit]

The sashihijiki (挿肘木^?) is a bracket arm inserted directly into a pillar instead of resting onto a supporting block on top of a pillar, as was normal in the wayō style. Typical of the Daibutsuyō style, these brackets are clearly visible in the photo at the top of the article.

Tsumegumi [edit]

Tsumegumi (詰組^?) are intercolumnar supporting brackets, usually futatesaki or mitesaki, installed one immediately after the other. The result is an extremely compact row of brackets. Tsumegumi are typical of the Zenshūyō style, which arrived to Japan with Zen Buddhism at the end of the 12th century.^[13]

Footnotes [edit]

1. ^ Dougong (Chinese: 斗拱; pinyin: dǒugǒng) in Chinese

References [edit]

1. ^ Parent, Mary Neighbour. Japanese Architecture and Art Net Users System. Tokyou, retrieved on February 10, 2011
2. ^ ^{a b c d} Nishi, Kazuo; Hozumi, Kazuo (1996) [1983]. What is Japanese architecture? (illustrated ed.). Kodansha International. pp. 36–38. ISBN 4-7700-1992-0. Retrieved 2009-11-11. 
3. ^ "Dougong brackets". China Info Online. Retrieved 16 July 2011. 
4. ^ "Shutaku Purodyūsu Keiz Netto" (in Japanese). Retrieved 18 February 2011. 
5. ^ "Gojū no Tō - Sono Futō Shinwa no Fushigi" (in Japanese). Retrieved 18 February 2011. 
6. ^ Parent, Mary Neighbour. Japanese Architecture and Art Net Users System. Hitotesaki tokyou, retrieved on February 13, 2011
7. ^ "Tokyō, kaerumata, kibana". Retrieved 17 February 2011. 
8. ^ Yoshiaki, Kudō. "Kumimono". Shogakukan Encyclopedia, Online Version. YAHOO! Japan. Retrieved 18 February 2011. 
9. ^ Parent, Mary Neighbour. Japanese Architecture and Art Net Users System. Mitesaki tokyou, retrieved on February 17, 2011
10. ^ Parent, Mary Neighbour. Japanese Architecture and Art Net Users System. Yotesaki tokyou, retrieved on February 17, 2011
11. ^ Parent, Mary Neighbour. Japanese Architecture and Art Net Users System. Mutesaki tokyou, retrieved on February 13, 2011
12. ^ Parent, Mary Neighbour. Japanese Architecture and Art Net Users System. Kumo tokyou, retrieved on February 18, 2011
13. ^ Parent, Mary Neighbour. Japanese Architecture and Art Net Users System. Tsumegumi, retrieved on April 28, 2011

Gallery [edit]

• 

  Diagram of bracket and cantilever arms from the building manual Yingzao Fashi (published in 1103) of the Song Dynasty

• 

  Tokyō components (block, bracket, kobushibana/kibana). Click to enlarge and display captions

• 

  Hitotesaki tokyō, rōmon, Honkaku-ji, Kamakura

• 

  Futatesaki tokyō, Kōmyō-ji, Kamakura

• 

  Mitesaki tokyō, Daitoku-ji, Kyoto. Note the tail rafters.

• 

  Kumo tokyō, Hōryū-ji, Chūmon

• 

  Interior of Tōdai-ji's Nandaimon. Visible the beams connecting to the tokyō

• 

  Interior of Tōdai-ji's Nandaimon. Visible the beams connecting to the tokyō

• 

  Tsumegumi (Butsuden, Kenchō-ji)

Wikimedia Commons has media related to: Tokyō

v t e Elements of Japanese architecture Styles Buddhist Buke Daibutsuyō Gassho Giyōfū Hachiman Hirairi Hiyoshi (also called Hie) Irimoya Ishi-no-ma Kasuga Kibitsu Nagare Ōbaku Zen Setchūyō Shinden Shinmei Shinto Shoin Sukiya Sumiyoshi Taisha Wayō Zenshūyō A model of Himeji Castle Building types Butsuden Castle Chashitsu Dō Haiden Heiden Hokora Hōkyōintō Kura Kyōzō Machiya Main Hall Minka Setsumatsusha Shōrō Tahōtō Tō Yagura Roof styles Hidden roof Irimoya Karahafu Structural Burdock piling Chigi Disordered piling Engawa Fusuma Hisashi Irimoya-zukuri Irori Jinmaku Katōmado Katsuogi Kuruwa Mokoshi Moya Nakazonae Namako wall Nightingale floor Onigawara Ranma Shōji (see also washi) Sōrin Tamagaki Tatami Tokonoma Tokyō Tsumairi Shibi Gates and approaches Genkan Kairō Karamon Mon Nijūmon Niōmon Rōmon Sandō Sanmon Sōmon Torii (Mihashira) Rooms Chashitsu Daidokoro Mizuya Shoin Toilets Washitsu Furnishings Butsudan Byōbu Chabudai Emakimono Furo Futon Getabako Kaidan dansu Kamado Kamidana Kichō Kotatsu Misu Noren Sudare Tamaya Tansu Zabuton Zafu Outdoor objects Chōzuya/Temizuya Ishigantō Komainu Tōrō Measurements Ken Koku Ri Shaku Sun Groups Architectural Institute of Japan Japan Institute of Architects Metabolist Movement See also Groups of Traditional Buildings Iki Japanese garden (zen) National Treasures (castles residences shrines temples) Ryokan Sentō Wabi-sabi Yabo